Usb 6008 oem manual definition

LabVIEW: Driver install for NI USB 6008 card; The problem I have started when I tried to install the NI USB 6008 card on a Windows XP 32 bit.

I read the user manual of that card and it sais that it should work on 32 bit Windows 7 and XP and even on Windows 2000. USB Device Installed on Motherboard National Instruments Corporation 5 NI USB OEM User Guide 6 Connecting to USB Using the Status LED Driver You can use the USB connector on the USB OEM device to connect to the USB host.

Connecting the NI USB to a Computer Plug one end of the USB cable into the NI USB and the other end into an available USB port on the computer. LED Indicator The NI USB device has a green LED next to the USB connector. The USB6008 provides analog and digital IO as well as all necessary firmware and driver software.

In addition, each USB6008 comes with a generic 34pin connector for easy integration as a daughtercard. Another thing to note is that the pinouts for the NI USB OEM cards are not the same as the pinouts for the nonOEM version.

If you are using the OEM version, the correct pin diagrams (shown in" Additional Information" ) are found in the NI USB Usb 6008 oem manual definition User Guide. National Instruments Corporation 3 NI USB User Guide and Specifications Dimensions Figure 3 illustrates the dimensions of the NI USB device. Figure 3. NI USB in Millimeters (Inches) Safety Guidelines Caution Operate the NI USB 9 only as described in these operating instructions.

The NI USB OEM device is intended to be used as a component of a larger system. National Instruments can help develo pers meet their compliance requirements. USB6008 OEM Multifunction DAQ DISCLAIMER These models and associated materials (collectively, the Models) are provided without charge and, in accordance with the Terms of Use of ni.

com, are The NI USB6009 is a USB based data acquisition (DAQ) and control device with analog input and output and digital input and output. The price is 2100 NOK. The NI USB6008 is a similar, but somewhat simpler (and cheaper) device. The NI USB provides connection to eight analog input (AI) channels, two analog output (AO) channels, 12 digital inputoutput (DIO) channels, and a 32bit counter with a fullspeed USB interface.

NI USB BusPowered Multifunction DAQ USB Device Franais Deutsch ni. commanuals The National Instruments USB devices provide eight singleended analog input (AI) channels, two analog output (AO) channels, 12 DIO channels, and a 32bit counter with a fullspeed USB interface.

The USB6008 provides basic functionality for applications such as simple data logging, portable measurements, and academic lab experiments. The device features a lightweight mechanical enclosure and is bus powered for easy portability.



Phone: (362) 948-8081 x 9590

Email: [email protected]